Fluke 8845A Manual page 70

8845A/8846A
Programmers Manual
Parameters <date> = MM/DD/YYYY or MM-DD-YYYY.
Examples
Query
SYSTem:TIME(?) <time>
Description Sets the system clock time in 24 format.
Parameters <time> = HH:MM:SS or HH-MM-SS
Examples
Query
SYSTem:VERSion?
Description Retrieves the Meter's present SCPI command version.
Examples
DATA:POINts?
Description Retrieves the number of measurements contained in the Meter's internal
Examples
*RST
Description Resets the Meter to its power-up configuration.
Examples
IDN <n>, [<quoted string>]
Description Enables or disables the retrieval of a user-specified IDN string or factory-
Parameters <n>
Example
60
MM between 1 and 12
DD between 1 and 31
YYYY between 1970 and 2038
SYST:DATE 10/25/2007
SYST:DATE?
HH between 0 and 23
MM between 0 and 59
SS between 0 and 59
SYST:TIME 14:25:10
SYST:TIME?
SYST:VERS?
memory.
DATA:POIN?
*RST
set IDN string with the *IDN? command. Also sets the user defined IDN
string.
= ON or 1
OFF or 0
<quoted string> =
IDN ON, "My Meter"
Returns the Meter's system clock date.
Sets time to 2:25:10 PM
Returns the Meter's system clock time.
Returns the SCPI version.
Returns number of measurements in internal
memory.
Resets the Meter.
Enables user-defined string.
Disables user-defined string and causes the
factory IDN string to be returned for an *IDN?
command.
Up to a 35 character string.
Sets the IDN string to "My Meter" and enables
the user defined string to be returned when the
*IDN? command is received by the Meter.