Advertisement
Remote Control Operation:
Select Channel：
Mode 1: use
channel or press
Mode 2: select the channel number and press
Select Function：
Mode 1: use
Mode 2: press
Basic Menu Number:
0
MAC Address
1
IP Address
2
Host IP Address
3
Enable advance menu
4
Disable advance menu
Advance Menu Number:
5
Device No
6
Group No
7
Party No
8
Remote ID
9
System Version
10
Restart Link
11
Stop Link
12
Video or Graphic Mode
13
Anti-Dithering
15
Set Device No
16
Set Group No
17
Set Party No
18, Set Remote ID
20
Enable Channel Button
21
Disable Channel Button
22
Enable IR Remote
23
Disable IR Remote
24
Enable IR Extender
25
Disable IR Extender
26
Enable RS-232 Assign Mode
27
Disable RS-232 Assign Mode
IR Module Menu Number: (display when IR module be installed)
30
Send IR Key
31
Learn IR Key
32
Delete IR Key
33
Delete All IR Key
System Maintains Menu Number:
300 Force Update EDID of a Target Client Set host EDID from current monitor
333 Reset to Factory Default
999 Reboot
or
select channel, if no any action after 3 seconds then it is the select
immediately to confirm the input channel.
or
select function, press
, then input function number as below , press
to confirm the input channel.
to confirm.
Display equipment MAC Address.
Display equipment IP Address
Display current connected Host IP Address
Enable advance menu
Disable advance menu
Display device number
Display group number
Display party number
Display current Remote ID setting
Display system version
Reconnect with Host
Stop the connection with Host
Switch Host Video (default) or Graphic Mode
Switch Host Video Anti-Dithering define, default is off
Set device number to 0~999
Set group number to 0~99
Set party number to 0~99
Set Remote ID to 0~9
Enable Channel Button
Disable Channel Button
Enable IR Remote
Disable IR Remote
Enable IR Extender
Disable IR Extender
Enable RS-232 Assign Mode, auto reboot after setting
Disable RS-232 Assign Mode, auto reboot after setting
Send learned IR Key 0~31
Learn IR Key 0~31
Delete learned IR Key 0~31
Delete all learned IR Key
Reset to Factory Default
Restart the system
to confirm.
8
Advertisement
