Download Print this page

Advertisement

Quick Links

HDMI KVM & USB, RS232 , IR ,Analog Audio CAT5 Extender over IP
ITEM NO: HKM01BT, HKM01BR
The HKM01B HDMI KVM, USB with Analog audio, RS232, and IR CAT5 extender design for extends and
distribute all signals over one CAT5 up to 150 meters, with local HDMI monitor output. It provides superior
video quality up to 1920 x 1200 resolutions, and using cost effective Cat5e cable, instead of HDMI, RS232
cables, for an easy, neater and reliable installation. The local and remote units can be connected together
for a Point-to-Point connection via CAT5e/6 cable or a Point-to-Many connection via a managed network
switch.
It is optimized for applications at broadcasting system, multimedia display and multi-data sharing,
digital signage, home network integration, and industrial control, hospital, education, security, Matrix network
system and system control over RS232 and equipment control over IR.
Features:
Extend HDMI, RS232, IR and USB, analog audio signals over one CAT5E/CAT6 cable.
Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA) 32bpp@ 60 Hz
Transmission range up to 150M over CAT5e, 180M over CAT6.
Supports 2-way RS232 commands at baud rate 115200 (control software on a PC, or other automated
control system hardware) to control devices attached to the matrix using RS232. Full Duplex data
communication.
HDMI 1.3b and HDCP compliant.
HDMI audio support up to LPCM 7.1@192Khz
Built in Bi-Directional analog audio.
Built in Bi-Directional IR.
Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
Support PC software and Android/iOS APP control.
HKM01BR receiver input source select could be from IR remote control or front panel button.
HKM01BT transmitter unit built in HDMI loop output.
HKM01BR receiver built in IR programmable module, allow using IR remote control to do
IR/RS232 command.
Receiver unit with 4 ports USB devices (1 port USB 1.1 & 3 Port USB 2.0), to extend USB peripheral
devices, such as flash disk, hard disk, keyboard, mouse, etc.
Support point to point and multiple source devices to multi-display connections via Gigabit network
switch.
Work with HKM01B (HDMI), DKM01B (DVI), VKM03B (VGA) serials products.
Perfect for control remote machines and security monitoring systems, digital signage application.
Optional model: SR01 signal repeater for longer distance application.
HDMI KVM over IP with USB, RS232, IR, Analog Audio

Advertisement

loading

Summary of Contents for SC&T HKM01BT

  • Page 1  HKM01BR receiver input source select could be from IR remote control or front panel button.  HKM01BT transmitter unit built in HDMI loop output.  HKM01BR receiver built in IR programmable module, allow using IR remote control to do IR/RS232 command.
  • Page 2 Installation View: Multiple Transmitters to Multiple Receivers Connection: (Matrix Switcher) Point to Point Direct Connection: (Extender)
  • Page 3 One Transmitter to Multiple Receivers Connection: (Splitter) Multiple Transmitters to One Receiver Connection: (Switcher)
  • Page 4 Optional Model: SR01 Signal Repeater (order separately)  Extend data signal for an additional 120meters.  Application for HKM01B signals for extra long range transmission.  Ability to cascade connection with multiple SR01 for long range transmission  Built in LED status indication. ...
  • Page 5: Led Indication Status

    Back Panel Rotary Switch Function: HKM01BT and HKM01BR must setting at same channel in order to do mutual transmission. Rotary switch to be follow 16 HEX, could switch “ 0 ~ F “ total 16 channels, A = channel 10, B = channel 11, others channel same as 16 hex conversion.
  • Page 6: System Default Settings

    RJ45 pin define: Link Cable (TIA/EIA-568-B) 1. Orange-white Data 1 + 2. Orange Data 1 - 3. Green-white Data 2 + 4. Blue Data 3 + 5. Blue-white Data 3 - 6. Green Data 2 - 7. Brown-white Data 4 + 8.
  • Page 7 Remote Control Function: If you do not use PC computer management to setup HKM01BR, then you could use the IR infrared remote control to preset channel selection. Using the IR remote control to the front of HKM01BR will be ok. Initial at first time use the remote control or after change battery of remote control, the IR remote control and the equipment Remote ID must be using same ID.
  • Page 8 Remote Control Operation: Select Channel: Mode 1: use select channel, if no any action after 3 seconds then it is the select channel or press immediately to confirm the input channel. Mode 2: select the channel number and press to confirm the input channel. Select Function:...
  • Page 9 RS232 command from HKM01BT transmitter to control the IR module send and IR signal to TV. It could control all kinds of TV but do not need RS232 port on it.
  • Page 10 RS-232 Assign Mode: User could use RS-232 port of transmitters at baud rate 115200bps (8-N-1) to operate/setup the receivers at same channel Command format: >CMD_Address> Command Parameters All accord receivers will run the command and parameters, we also add 3 kinds of user defined numbers except MAC &...
  • Page 11 ※ The maximum of OSD_ON is 30 characters, not support comma sign 「,」 , some characters must use \x## format to display, ## means the characters number in ASCII 16 code e.g.: \x0a is change to next line, \x28 is ( brackets sign, \x22 is “ sign e.g.: >CMD_M1234>...
  • Page 12 Caution: 1. Not recommend to work with general LAN connection to avoid large video, data transmission or multicast packets to slow down your other LAN devices. 2. Gigabit switch hub muse use support IGMP protocol and Jumbo Frame over 8K Ethernet Switch Hub in order to achieve the best transmission quality 3.
  • Page 13 Use CAT5 cable to connect transmitter/receiver RJ45 port to PC LAN port, open IE browser then select View  Explorer Bars  Bonjour. Double click on “HTTP on ast-gateway(HKM01BT)” or “HTTP on ast-client (HKM01BR)”, it will pop up web setup in Bonjour windows as below:...
  • Page 14 System Menu:  Version Information Firmware version information  Update Firmware Update system firmware  Utilities System tools  Factory Default Set system to factory default  Reboot Reboot system  Default EDID Set EDID to default  Console API Command Run Console API command ...
  • Page 15 Network Menu: IP Setup:  IP Mode could be Auto IP, DHCP, Static three mode, default is Auto IP  Casting Mode : could be Multicast, Unicast mode, default is Multicast, When using Multicast mode, please check the “Auto select USB operation mode per casting mode”...
  • Page 16 Functions Menu: For HKM01BT Transmitter: Video over IP: This function setup the video signals send from network, default is checked. Please note it will turn off HDMI output in same channel if this function be disabled, only analog audio output...
  • Page 17 USB over IP Setup: This function setup the USB signals send from network, default is checked. Operation Mode: USB device operation setting, default is “Auto select mode” In Unicast mode recommend set to “Active on link”. In Multicast mode recommend set to “Active per request”.
  • Page 18 Serial over IP: This function setup Serial (RS232) signal sends from network  Operation Mode: Default is “Type 2 (Recommended. Dumb redirection.)”  Baudrate Setting for Type 2 : It could change Baud rate as below : 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 230400, default is 115200...
  • Page 19 Package Include: HKM01BT Transmitter x 1 HKM01BR Receiver USB A to B cable x 1 IR emitter cable x 1 DC 5V 2Amp power adapter x 2 Specification: ITEM NO. HKM01BT HKM01BR 480i / 480p / 720p / 1080i / 1080p @ 24Hz、25Hz、30Hz、50Hz、60Hz Support Resolution CAT.5e:150M / CAT.6:180M (Max)

This manual is also suitable for:

Hkm01br