Engine Oil Pressure Indicator Light (Greensmaster 3300)
The engine oil pressure indicator light should come on
when the ignition switch is in the RUN position with the
1
engine not running. Also, it should illuminate with the en-
gine running if the engine oil pressure drops to an unsafe
level.
IMPORTANT: If the oil pressure indicator light is il-
luminated with the engine running, shut off the en-
gine immediately.
To test the oil pressure light and circuit wiring, ground the
wire attached to oil pressure switch located on the en-
gine near the oil filter. Turn ignition switch to the RUN
2
position; the engine oil pressure light should come on in-
dicating correct operation of the indicator light and cir-
cuit wiring.
Figure 26
1. Control console
2. Oil pressure light
Electrical System
Page 6 - - 28
Greensmaster 3300/3400