Adjust Throttle Control; Adjustments 4 - Toro Greensmaster TriFlex 3300 Service Manual

Adjustments

Adjust Throttle Control

Proper throttle operation is dependent upon proper ad-
justment of throttle control. Make sure throttle control is
operating properly.
NOTE: The throttle cable swivel should be positioned
in the lowest hole in the speed control lever.
1. Move throttle control lever on control console to
FAST position.
2. Check position of the engine speed control lever on
fuel injection pump (Fig. 1). The speed control lever
should be contacting the high speed screw when the
throttle control lever is in the FAST position.
3. If necessary, throttle control can be adjusted by loos-
ening cable jam nuts and repositioning control cable un-
til speed control lever contacts high speed screw when
the throttle control lever is in the FAST position (Fig. 2).
Tighten cable jam nuts after adjustment has been com-
pleted.
Greensmaster 3400
3
1. High speed screw
2. Speed control lever
1
1. Throttle cable
2. Speed control lever
Page 4 - - 5
1 2
Figure 1
3. Fuel solenoid
3
2
Figure 2
3. Cable jam nut
4. Throttle cable swivel
Diesel Engine
4