Engine Oil Pressure Light; Hour Meter - Toro 04520 Operator's Manual

Engine Oil Pressure Light

The light (Figure 17) glows if the engine oil pressure drops
below a safe level.
Water Temperature Light
The light (Figure 17) glows and the engine automatically shuts
down when the engine coolant temperature gets too high. If
the engine shuts down, you can start the engine and drive
the machine for 10 seconds before it will shutdown again,
allowing you to move the machine to a location where you
can allow it to cool down.
Service Indicator Light
The service indicator light (Figure 17) illuminates when the
machine sensors detect an issue with one of the systems
of the machine. If this light illuminates, stop what you are
doing and drive to a safe location where you or a service
technician can diagnose the problem. For more information
on diagnosing system issues using the service indicator light,
refer to Diagnosing the Service Indicator Light (page 45).
Glow Plug Indicator Light
When the glow plug indicator light (Figure 17) is lit, it
indicates the glow plugs are on.
Note: The glow plug indicator light may illuminate for a
short time after the engine has started; this is normal.

Hour Meter

The hour meter (Figure 18) indicates the total hours the
machine has operated. It starts to function whenever the key
switch is rotated to On.
g014600
Figure 18
1. Hour meter
Parking Brake Lever
Pull up on the brake lever (Figure 15) to set the parking
brake. Disengage it by pushing it forward and down. Lock
the parking brake any time you leave the machine.
Backlap Lever
The backlap lever is located under the plastic cover to the left
of the seat. Use the backlap lever (Figure 20) in conjunction
with the raise/lower mow control lever and the reel speed
control for backlapping the reels.
1. Backlap lever—mow
position
Reel Speed Control
The reel speed control is located under the plastic cover to
1
the left of the seat. Use the reel speed control (Figure 21) to
adjust the rpm of the reels.
20
Figure 19
1
2
Figure 20
2. Backlap lever—backlap
position
g01461 0
g014620