1.
Disconnect the fan cable (1) from the system board.
2.
Remove the two Phillips PM2.0×4.0 screws (2) that secure the fan to the top cover.
3.
Remove the fan (3).
Reverse this procedure to install the fan.
Speakers
Description
Speakers (include left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
Remove the speakers:
1.
Disconnect the speaker cables (1) from the system board.
2.
Remove the three Phillips PM2.0×2.7 screws (2) that secure the speakers to the top cover.
34
Chapter 5 Removal and replacement procedures
Bottom cover on page
28).
Spare part number
801501-001
Battery on page
29).