Touchpad - HP Spectre x360 Maintenance And Service Manual

3. Remove the speakers (3).
Reverse this procedure to install the speakers.

TouchPad

NOTE: The TouchPad spare part kit includes the TouchPad cable.
Description
In ash silver finish for use only on computers with model numbers 13-4100 through 13-4199
In natural silver finish for use only on computers with model numbers 13-4000 through 13-4099
Before removing the TouchPad, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the TouchPad:
1. Release the zero insertion force (ZIF) connector (1) to which the TouchPad cable is attached, and then
disconnect the TouchPad cable from the system board.
Bottom cover on page
Battery on page 29).
28).
Spare part number
833715-001
801499-001
TouchPad 35