Cr Maintenance Menu; Initialization Menu - MUTOH ValueJet VJ-1628TD Operation Manual

VJ-1628TD, VJ-2628TD OPERATION MANUAL

5.1.18 CR Maintenance menu

Performs maintenance.
Use this to perform the following daily maintenance shown below.
• When replacing the flushing-box sponges.
6.1.3 Replacing the flushing-box sponges
• When cleaning the cleaning wiper unit
6.2.4 Cleaning the cleaning wiper unit
NOTE
• When the CR Maintenance menu is displayed, even leaving the keys untouched for three minutes
does not return to the printer to normal status.
2.3 Printer status
Setup item
CR Maintenance

5.1.19 Initialization menu

Returns the settings of the printer to default.
Setup item
Initialization
Setting
Start
End
—
Setting
ALL
MediaType
Except MediaType
—
Description
Performs maintenance.
• [Enter] key:
The print head moves to the left, then the cleaning wiper
unit is up.
Completes maintenance.
• [Enter] key:
The cleaning wiper unit is down, then the print head returns
to its original position.
• [Cancel] key: shifts to the previous menu without
maintenance.
5.1 Setup menu
Description
All settings can be returned to factory default.
The settings of the MediaType menu is returned to factory
default.
The settings value other than the MediaType menu is returned
to factory default.
• [Enter] key:
"** Initialing **" is displayed on the operation panel and
the printer initializes the setting.
• [Cancel] key: shifts to the previous menu without
initialization.
5.1 Setup menu
5-25
5 Panel setup menu