Installation Diagram - Wilson Electronics PRO 70 PLUS SELECT Installation Manual

Installation Diagram

Note: A Wilson Lightning Surge
Protector (859902) is recommended
for all building installations. Make sure
the protector is installed outside the
building at point of entry connected to
a suitable ground and in line between
the Outside Antenna and the Signal
Booster.
3
Contact Wilson Electronics Customer Support Team with any questions at 866-839-9361
or email: tech@wilsonelectronics.com.
Outside Antenna
(Wide Band Directional
Antenna shown)
Spacing Critical
Inside Antenna
Preferred Method: Place the
Inside Antenna in the ceiling
facing down for the best
coverage .
Mon.- Fri. Hours: 7 am to 6 pm MST.
Inside Antenna
Power Supply
Surge Protector
Power Strip