5.3.3 Ethernet Port Settings
Value Range
Default Value
Web User Interface Reference
5.3.3 Ethernet Port Settings
PHY_MODE_LAN
Value Format
Description
Value Range
Default Value
Web User Interface Reference
VLAN_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
VLAN_ID_IP_PHONE
Value Format
166
Administrator Guide
•
Y: Not use (use static DNS)
•
N: Use DNS obtained by DHCPv6
N
Auto DNS via DHCP (Page 78)
INTEGER
Specifies the link speed and duplex mode of the LAN port.
•
1: Auto
•
2: 100Mbps/Full Duplex
•
3: 100Mbps/Half Duplex
•
4: 10Mbps/Full Duplex
•
5: 10Mbps/Half Duplex
1
LAN Port (Page 79)
BOOLEAN
Specifies whether to use the VLAN feature to perform VoIP
communication securely.
Note
•
You should specify "Y" for only one of "LLDP_ENABLE" or
"VLAN_ENABLE".
If "Y" is specified for two or more of the parameters above, the
settings are prioritized as follows: "VLAN_ENABLE" >
"LLDP_ENABLE". Therefore, if "Y" is specified for both
"VLAN_ENABLE" and "LLDP_ENABLE", the VLAN-related
settings are used.
•
Y (Enable)
•
N (Disable)
N
Enable VLAN (Page 80)
INTEGER
Document Version 2015-02