Boiler Installation - Heatline solaris 24PC Installation, Servicing & User Instructions

Supplied by HeatingSpares247.com

10. Boiler Installation

10.1 Manual Handling:
heavy and it is suggested that it should be
lifted by two people. When manoeuvring the
boiler always use safe techniques truck if
possible and obtain assistance if required –
when lifting keep your back straight, bend
your knees, don't twist, move your feet. Avoid
bending forwards or sideways and keep the
load as close to your body as possible. Where
possible transport the boiler using a suitable
trolley, sack truck or get some assistance.
Grip the boiler firmly and before lifting
establish where the weight is concentrated to
determine the centre of gravity, repositioning
yourself if necessary.
To remove the appliance:
1. Carefully slit or remove the sealing tape
being careful not to scratch the appliance
door.
2. Fully open the carton lid and remove the
condensate hose and mounting bracket.
3. Roll the carton onto its open face.
17
4. Lift the carton free of the inner packaging.
5. Remove
instructions.
6. Stand the boiler on its base within the
styrene block and remove
packaging piece.
7. If you wish to remove the styrene base lie
the appliance on its back to do so.
8. Read the instructions carefully before
installation of the appliance.
10.2 Prior to installing the boiler check the
contents of the carton: Appliance, Valves,
Condensate hose, Wall Hanging Bracket,
Mounting Template, Service, Installation and
User Manual, which includes the Benchmark
Log Book, and Guarantee Card. The boiler
dimensions are given in figure 9.
This appliance is
and valve package
the top
and
Bottom
Fixing Jig (Optional)
Give dimensions between valves
Page 17
solaris 24PC, 30PC
Figure 9
A: 430 mm
B: 128 mm
Figure 10