Heatline solaris 24PC Installation, Servicing & User Instructions page 5

Supplied by HeatingSpares247.com
The Signs on Box
Avoid getting the carton damp or wet
04
The sign of approval.
This appliance has been certified
by IMQ
This is a fragile piece of equipment:
Do not drop.
The packed appliances may be
stacked five high.
Do not crush the packaging as this
may damage the appliance.
Store the appliance upright as
indicated on the box.
Access, warnings and connections on the boiler
This picture shows the terminal
block, which is located at the
Room Thermostat bottom left
hand side of the control panel
cover,
thermostat
NOTE: This is a voltage free connection and no
power must be applied to these terminals. For
mains powered thermostat connection, see section
9.5.
230 V
box. Turn off and isolate the appliance before
removing this cover. NOTE: Take care as there
may be residual voltage within some components.
Potentiometer cover: Removal of
the cover, which is found on the
back of the control box, gives
access
potentiometers. NOTE:
make any adjustments without
reading the instructions carefully.
solaris 24PC, 30PC
to which the room
must be fitted.
Warning High Voltage!
This sign is located on the
back of the control box
housing warning of high
voltages within the control
to the adjustment
Do not