York Fitness Endurance Cycle Owner's Manual page 9

6. Attach the console
1. Connect the computer cables together as shown
- make sure they are fully connected.
2. Secure the console onto the fixing bracket by
using 4 x round phillips head machine screw.
( the screws are located in the back of the console)
3. Plug the hand pulse sensor wire into the socket on
the back of the console as shown.
7. Attach the seat and seat post
1. Remove the hand wheel knob from the seat slide
bracket underneath the seat as shown.
2. Attach the seat to the seat post and secrure in position
with the hand wheel knob.
3. Loosen & pull the seat post plunger then slide the seat
post into the seat post mounting tube to the desired
and secure it into position.
!
Take care to ensure the computer cables do not
get trapped when you attach the computer.
!
Make sure the bolts are fully tightened with the
50
22
allen key.
42
FIXINGS: FIXINGS:
Part
No.
50
x 4
9