York Fitness Endurance Cycle Owner's Manual page 8

4. Attach the front post
1. Connect the computer cables as shown - make sure
they are fully connected.
2. Slide the front post tube over the front post monuting
and secure, using 3x allen head bolts as shown.
3. Attach the plastic end cap x 4 onto the chain cover in
postion as shown.
!
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the bolts are fully
tightened with the allen key.
!
Take care to ensure the computer
cables do not get trapped when
you attach the front post.
5. Attach the handlebars
1. Pull and slide the handlebar pass through the
console fixing plates carefully as shown.
2. Rotate the handlebar and rest onto the handlebar
holder in position properly.
!
Take care to ensure the computer cables do not
get trapped when you attach the handlebar.
8
16
38
16
16
38
35
51
38
16
FIXINGS: FIXINGS:
Part
No.
16
x 3
Part
No.
38
x 3
FIXINGS: FIXINGS:
Part
No.
35
x 1
Part
No.
51
x 2