York Fitness Endurance Cycle Owner's Manual page 10

8. Attach the pedals
1. Attach the pedal straps to the pedals. ( the straps
and pedals are marked L & R ,match each strap to
the corresponding pedal )
2. Attach the "L " pedal to the left crank arm with one
metal bushing as shown - this pedal will thread on
anti-clockwise.
3. Attach the "R " pedal to the right crank arm with one
metal bushing as shown - this pedal will thread on
clockwise.
!
Make sure the two pedal shafts are fully
tightened with spanner.
Final Checks
Your cycle is now assembled. Please make the following final checks before you use it for the first time
•
Make sure all screws, bolts and nuts are tightened securely
•
Make sure you have positioned it on a flat, level surface
Power up
1. Plug one end of the adaptor into your cycle as shown
2. Plug the other end into a suitable AC outlet
(220 – 240v – 50Hz)
10
67
65
67
65
68