Trane UniTrane Installation, Operation And Maintenance Instructions page 73

3. Configure the sensor options in the order shown in the table.
Setting
Temperature
• Choose Fahrenheit or Celsius
• Choose the degree resolution
(whole degrees, half degrees, or
tenths of degrees).
Setpoint
System
Fan
Note: Not all fan options are available
for all systems.
Occupancy (timed override)
4. Review the display to ensure that you have selected the correct configuration.
5. To return the display to operating mode, press the configuration button (see
Note: The sensor will revert to operating mode if no buttons are pressed for 10 minutes.
UNT-SVX07B-EN
• Press or to scroll to the next selection (as illustrated).
• Press or to move to the next menu (as illustrated).
Configuration Options
. .
no single
setpoint setpoint
no system
options enabled
auto/off
off/high (on)
.
.
dual setpoint
(Default)
auto/off/ auto/off/low
low/high med/high
off/low/high off/low/
med/high
Controls Interface
.
.
no fan options
enabled
Step 1, p. 71).
73