Trane UniTrane Installation, Operation And Maintenance Instructions page 54

Installation—Controls
Figure 17. Wall-mounted zone sensor dimensions
4.68 in (118.9 mm)
Sensor
When selecting a sensor location, avoid the following:
•
•
•
•
•
•
•
•
•
•
•
•
54
0.31 in (8 mm)
3.39 in (86 mm)
0.63 in (15.9 mm)
1.45 in (36.8 mm)
Areas of direct sunlight
Areas in the direct airstream of air diffusers
Exterior walls and other walls that have a temperature differential between the two sides
Areas that are close to heat sources such as sunlight, appliances, concealed pipes, chimneys,
or other heat-generating equipment
Drafty areas
Dead spots behind doors, projection screens, or corners
Walls that are subject to high vibration
Areas with high humidity
High traffic areas (to reduce accidental damage or tampering)
Metal barriers between the receiver and the sensor (for example, plastered walls with metal
lathe or metal roof decks)
Thick, solid concrete walls between the receiver and the sensor
Placing the sensor inside metal enclosures
TYP 0.24 in (6 mm)
2.9 in (73.5 cm)
0.12 in (3 mm)
2.48 in (63 mm)
2.62 in (66.5 mm)
TYP R.07 in (R1.9) mm
1.08 in (27.5 mm)
UNT-SVX07B-EN