Butterfly Body Removal - Cagiva Navigator Workshop Manual

BUTTERFLY BODY REMOVAL

• Remove the air filter and other relative parts as described in Page
C-49.
• Disconnect the suction tube from the three way union.
• Remove the left hand and right hand plastic protective covers of
the fuel pump and the expansion tank.
• Disconnect the incoming fuel tube by unscrewing the union fasten-
ers as shown in the figure.
Place a cloth underneath the union.
• Disconnect the connectors 1 and 2 of the injectors.
• Disconnect the connector of the TP sensor 3.
Disconnect the tubing from the cylinders 4 and the suction tubing 5
on the secondary air compartment.
INJECTION - AIR INTAKE SYSTEM
INJECTION - AIR INTAKE SYSTEM
2
1
3
4
C.51
5