Fuses; Ecm/Various Sensors - Cagiva Navigator Workshop Manual

FUSES

• Always search for the cause of a blown fuse. Eliminate the cause
and then substitute the fuse.
• Use only fuses of the correct amperage.
• Do not use wire or another substitute for a fuse.

ECM/VARIOUS SENSORS

• Seeing that each component is a high precision part, take care to
not damage the said components during the removal/installation
phases.
• Take care to not touch the electrical terminals of the ECM. The
static electricity of the body can damage the component.
• Before connecting or disconnecting an ECM coupling, make sure
that the ignition switch is in the OFF position. This will prevent
damage to the electronic parts.
• Do not connect the battery with inverted polarities. This will in-
stantly damage components of the FI system when the circuit is
switched on.
C.4
INJECTION - AIR INTAKE SYSTEM
INCORRECT
ignition switch
INCORRECT