Checking The Oil Cooler Pipes; Checking And Cleaning The Oil Cooler - Cagiva Navigator Workshop Manual

ENGINE
CHECKING THE OIL PRESSURE SWITCH
Refer to section G.

CHECKING THE OIL COOLER PIPES

Check if the oil cooler pipes show any signs of damage or leakage.
If any defects are found, replace the oil cooler pipes with new ones.

CHECKING AND CLEANING THE OIL COOLER

Using a compressed air jet, remove the dirt and dust from between
the oil cooler fins.
Check if the cooler shows any signs of oil leakage. If any defects are
found, replace the oil cooler with a new one.
If the cooler fins are bent or dented, straighten them with a small
screwdriver.
INSTALLATION
Installation is obtained by following the removing procedure in re-
verse order.
Refer to the pages indicated for details on how to perform each step.
Fit:
• The oil cooler (see page D-16).
• The oil pressure switch (see page D-45).
Adjust the following according to specifications:
Page
* Engine oil ............................................................................. D-16
D.176