THROTTLE CABLE ADJUSTMENT
Fine adjustments can be carried out by using the screw adjuster on
the throttle handgrip (see Chapter B).
MAJOR ADJUSTMENTS
• Remove the fuel tank as described in pages B-4 and B-6.
• Remove the air filter compartment. (See page C-51.)
• Slacken the locknuts 1 of the throttle return cable 2.
• Turn the return cable screw adjuster 3 to obtain the correct cable
play.
• Slacken the locknuts 4 of the throttle traction cable 5.
• Screw or unscrew the traction cable screw adjuster 6 until 2.0-
4.00 mm of play is obtained at the throttle handgrip.
• Tighten the locknut 4 whilst keeping the adjuster 6 still.
• Keep the throttle handgrip in the closed position and slowly turn
the return cable screw adjuster 3 to obtain a slack of 1.0 mm.
• Tighten the locknut 1.
CHOKE CABLE ADJUSTMENT
• Remove the fuel tank as described in Chapter B.
• Remove the air filter compartment.
• With the choke cable completely pulled tight, check that the cam
A is in contact with the stop B.
• Slacken the locknuts 1 of the cable 2.
• Turn the screw adjuster 3 until the cam A comes into contact with
the stop B.
• Tighten the locknuts 1.
INJECTION - AIR INTAKE SYSTEM
2
3
1
5
6
4
A
B
2
3
1
C.71