Removing The Clutch - Cagiva Navigator Workshop Manual

ENGINE

REMOVING THE CLUTCH

After draining the engine oil, remove the following components in
the order indicated.
Refer to the pages indicated for details on how to perform each step.
Drain:
• The engine oil.
Remove:
• The clutch bell housing cover (see page D-29).
• The clutch springs.
• The pressure plate (see pages D-29 and D-30).
• The push rod.
• The bearing.
• The washer (see page D-30).
• The clutch push rod.
• The clutch plates.
• The spring washer.
• The spring washer seat (see page D-30).
D.115