Front Brake Pincer Assembly Removal - Cagiva Navigator Workshop Manual

FRONT BRAKE PINCER ASSEMBLY REMOVAL

If there are signs of leakage or traces of oil on the pincer body, it
must be substituted.
• Drain the brake fluid as previously described and illustrated.
• Remove the brake tube from the pincer by unscrewing the joint bolt
1. Collect the brake fluid that is left in the system in a suitable con-
tainer.
Place a cloth underneath the joint bolt of the brake pincer to collect
the final drops of brake fluid.
• Remove the brake pincer assembly by unscrewing the two pincer
mounting screws 2.
Never use brake fluid left over from a previous change of fluid
or brake fluid that has been stored for a long period of time.
If the brake system leaks fluid, riding safety is compromised.
Leaking fluid can also damage painted surfaces. Check for
cracks or leaks on the tubes and at the joint bolts of the
brakes.
To reassemble, completely push in the pistons and proceed in the
reverse order of removal. Tighten the joint bolt and the two pincer
screws to the torque specified.
Brake tube bolt 23 N·m
Pincer fixing bolt 21.5÷23.5 N·m
After replacing the pincer assembly, bleed the air out of the
braking system.
F.8
BRAKES
2
1