Table of Contents
Advertisement
4. Attach the seat track
1. Ask someone to help you hold the seat carriage out
of the way, and connect the computer wires as shown
- make sure it is fully connected.
2
Slide the seat track over the mounting support carefully
and secure in position by using 2 x allen head bolts,
spring washers and flat washers as shown -- be sure to
fit them in the same order as the diagram.
5. Fold up the rower
1. Slide the seat carriage downwards to the end stop.
2. Carefully hold and push the seat track downwards
until the rear moving wheel stands on the floor. This
folds the rower to stand stably on the floor.
3. Secure the front post to the main frame in position
with the hand wheel knob & washer as shown.
rear moving wheel
8
!
Take care to ensure the computer
wires do not get trapped when you
attach the seat track.
!
Make sure the bolts are fully
tightened with the allen key.
1.
2.
FIXINGS:
FIXINGS:
Part
No.
47
x 2
Part
No.
9
x 2
Part
No.
35
x 2
FIXINGS:
FIXINGS:
Part
No.
48
x 1
Part
No.
49
x 1
48
3.
49
Advertisement
Table of Contents
