Yamaha YZF-R1B 2012 Service Manual page 95

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
1. Hazard switch lead
2. Right auxiliary light lead
3. Headlight sub-wire harness
4. Right radiator fan motor lead
5. AC magneto lead
6. Crankshaft position sensor
7. Coolant reservoir hose
8. Throttle cable
9. Right handlebar switch lead
10.Clutch cable
11.Main harness
12.Rectifier/regulator
13.Rectifier/regulator bracket
14.Oil cooler outlet hose
A. Place the hazard switch lead coupler
above the main harness. Make sure that
the claw of the coupler is not in contact
with any parts around the coupler.
B. To the headlight sub-wire harness
C. To the headlight
D. Order insignificant-the right auxiliary light
lead and front turn signal light coupler.
E. To the turn signal
F. Order insignificant-right radiator fan motor
lead and right handlebar switch lead. Make
sure the right radiator fan motor lead cou-
pler and two right handlebar switch lead
couplers do not overlap in the horizontal
direction.
G. Out of the two slits at the root of the recti-
fier/regulator bracket rib, clamp at the back
of the slit.
H. Clamp the clutch cable and oil cooler outlet
hose at the protector rivet ring of the clutch
cable.
I. Order insignificant-the right radiator fan
motor lead and right handlebar switch lead.
J. Fasten the right radiator fan motor lead,
right handlebar switch lead, main harness
and AC magneto lead under the rectifier/
regulator bracket rib and face the end of
the clamp down.
K. Order insignificant-hazard switch lead,
right radiator fan motor lead, right handle-
bar switch lead and AC magneto lead.
Either on top of or bottom of the rectifier/
regulator bracket rib.
L. Fasten the hazard switch lead, right radia-
tor fan motor lead, right handlebar switch
lead and AC magneto lead to the rectifier/
regulator bracket. Face the end of the
clamp to the bottom of the vehicle.
M. Outside of the vehicle.
N. Outermost part of the clutch cable should
be outward than outermost part of the oil
cooler outlet hose.
O. Face the end of the clamp to inside.
P. Inside of the vehicle.
email: info@motomatrix.co.uk
Q. Fasten the clutch cable in front of the oil
cooler outlet hose.
2-54
CABLE ROUTING