Yamaha YZF-R1B 2012 Service Manual page 365

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
Mechanical seal installer
90890-04132
Water pump seal installer
YM-33221-A
Middle driven shaft bearing
driver
90890-04058
Bearing driver 40 mm
YM-04058
2. Water pump housing
3. Mechanical seal installer
4. Middle driven shaft bearing driver
A. Push down
3. Install:
• Rubber damper holder "1"
• Rubber damper "2"
TIP
Before installing the rubber damper, apply tap
water or coolant onto its outer surface.
4. Measure:
• Impeller shaft tilt
Out of specification → Repeat steps (3)
and (4).
email: info@motomatrix.co.uk
New
New
6-14
ECA14090
Make sure the rubber damper and rubber
damper holder are flush with the impeller.
Impeller shaft tilt limit
0.15 mm (0.006 in)
1. Straightedge
2. Impeller
WATER PUMP