Yamaha YZF-R1B 2012 Service Manual page 490

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
Fault code No.
Symptom
Fail-safe action
Diagnostic monitor-
ing code No.
Meter display
Checking method
Item/components and
probable cause
1 ECU malfunction
Fault code No.
Symptom
Fail-safe action
Diagnostic monitor-
ing code No.
Meter display
D:14
Checking
method
Meter display
D:15
Checking
method
Item/components and
probable cause
1 Connection of accelerator
position sensor coupler
Check the connection of the
coupler is secure.
Remove the coupler, and
check each pin (for bending,
wear, or locking).
2 Connection of main harness
ECU coupler
Check the connection of the
coupler is secure.
Remove the coupler, and
check each pin (for bending,
wear, or locking).
email: info@motomatrix.co.uk
50
ECU memory malfunction
Engine startup: Under certain conditions
Riding: Under certain conditions
—
—
—
Check or maintenance job
Replace the ECU.
59
Open or short circuit of accelerator position sensor lead
Engine startup: Possible under certain conditions
Riding: Possible under certain conditions
D:14
D:15
Accelerator position sensor signal 1
• 12–22 (fully closed position)
• 97–107 (fully opened position)
• Check with throttle grip fully closed.
• Check with throttle grip fully open.
Accelerator position sensor signal 2
• 10–24 (fully closed position)
• 95–109 (fully opened position)
• Check with throttle grip fully closed.
• Check with throttle grip fully open.
Check or maintenance job
Poor connection → Connect
it securely, or repair/replace
the wire harness.
Poor connection → Connect
it securely, or repair/replace
the wire harness.
8-93
FUEL INJECTION SYSTEM
Sensor inspection proce-
Place the main switch to the
ON position.
Then, check that no fault
code indicated.
Sensor inspection proce-
Place the main switch to the
ON position, and check the
fault code indication.
No fault code indicated. →
Recovered.
Fault code indicated. →
Check the next step.
Place the main switch to the
ON position, and check the
fault code indication.
No fault code indicated. →
Recovered.
Fault code indicated. →
Check the next step.
dure
dure