Yamaha YZF-R1B 2012 Service Manual page 189

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
TIP
Tighten the self-locking nuts in stages and in a
crisscross pattern.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS22150
ADJUSTING THE REAR WHEEL STATIC
BALANCE
TIP
• After replacing the tire, wheel or both, the
rear wheel static balance should be adjusted.
• Adjust the rear wheel static balance with the
brake disc and rear wheel drive hub installed.
1. Adjust:
• Rear wheel static balance
Refer to "ADJUSTING THE FRONT
WHEEL STATIC BALANCE" on page 4-
22.
EAS22160
INSTALLING THE REAR WHEEL
1. Lubricate:
• Wheel axle
• Wheel bearings
• Oil seal lips
Recommended lubricant
Lithium-soap-based grease
2. Adjust:
• Drive chain slack
Refer to "ADJUSTING THE DRIVE
CHAIN SLACK" on page 3-21.
Drive chain slack (when adjust-
ing the drive chain)
25.0–35.0 mm (0.98–1.38 in)
Drive chain slack (when replac-
ing the
sprocket)
20.0–30.0 mm (0.79–1.18 in)
email: info@motomatrix.co.uk
drive chain and
3. Tighten:
• Rear wheel axle nut
• Rear brake caliper bolts
Rear wheel axle nut
150 Nm (15 m·kgf, 110 ft·lbf)
Rear brake caliper bolt (front
side)
27 Nm (2.7 m·kgf, 19 ft·lbf)
Rear brake caliper bolt (rear
side)
22 Nm (2.2 m·kgf, 16 ft·lbf)
EWA13530
WARNING
Proper brake hose routing is essential to
insure safe vehicle operation. Refer to
"CABLE ROUTING" on page 2-49.
4-30
REAR WHEEL