Yamaha YZF-R1B 2012 Service Manual page 111

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
1. Fuel tank upper cover
2. Fuel tank breather hose
3. Fuel tank overflow hose
4. Fuel tank
5. Fuel pump
6. Frame
7. Fuel hose connector cover
8. Clip
9. Fuel hose
A. Install the lip on the fuel pump gasket
upward.
B. Pump positioning punch mark
C. Install the fuel pump with the pump posi-
tioning punch mark and fuel pump bracket
concave part at the same position.
D. Install the fuel tank overflow hose and fuel
tank breather hose with the white paint
mark on each hose facing right of the vehi-
cle.
E. Align the clip knob to the paint mark on
each hose and face it to right of the vehicle.
F. Align the clip knob to the paint mark on
each hose and face it to front of the vehi-
cle.
G. Install the fuel tank breather hose with its
white paint facing front of the vehicle.
H. Install the fuel tank overflow hose with its
yellow paint facing front of the vehicle.
I. Install the fuel tank overflow hose and fuel
tank breather hose with the clamp opening
facing down.
J. Fuel pump side
K. Insert the connector until the click sound is
heard and check that the connector does
not come off. Make sure that no foreign
matter is caught in the sealing section. (It is
prohibited to wear the cotton work gloves
or equivalent coverings.)
L. After item "K" mentioned above is finished,
check that the clamp is inserted from the
down side "a", "b" and "c" sections are per-
fectly equipped.
M. This part works as a dropout stopper
N. Engine side
O. After Step "K" as above is finished, check
that the connector is completely attached
by sliding the double lock (orange part) "d"
on the connector as shown in the illustra-
tion and seeing if it touches firmly or not.
email: info@motomatrix.co.uk
2-70
CABLE ROUTING