Table of Contents
Advertisement
Overview
Control panel
All control elements are visible
externally. A removable transparent
cover clipped to the burner cover gives
access to the monitoring and control
elements for setting and operating
the burner.
The control panel contains the
switching circuit cut-out.
10
To remove the cover, press in one or
both sides gently and pull out at the
same time.
To replace the cover, position the two
clips at the appropriate openings and
push in.
09/2005 - Art. Nr. 13 019 526A
Function
A2
Standardised position for
fitting three-point regulator
A4
Display and operating unit
A4.1
Mounting location with clips
for removing the display and
operating unit
B10
Flame signal measuring
bridge (concealed)
F10
Fuse
S1/H10 Main switch
0 Off
1 On
(operating light in switch lights up).
S2
Operating mode selector
switch Auto/Manual N
S3
+ Manual increase of
burner power
-
Manual reduction of
burner power
m
N.B.:
The main switch of the control panel
only operates the control voltage.
Before working in the control area of
the burner, disconnect it fully from the
mains, incl. burner motor AC
connection.
Advertisement
Table of Contents
