How To Burn Your Cd Project To A Cd; Display Messages During Cd Burning - Marantz CDR420 User Manual

How to burn your CD Project to a CD

a If no *
b Press and release the fl ashing REC button , or
turn the Jog Wheel until the highest "T" is dis-
played. The highest T will be blank.
c Press and release the Jog Wheel to add the * and
display the fi le directory.
d Turn the Jog Wheel so WRITE CD is displayed.
ARE YOU SURE:N is displayed. Turn the Jog Wheel
to select Y, then press and release the Jog Wheel to
confi rm.

Display messages during CD burning

The CDR420 uses the display to keep you informed of
progress during CD writing (burning). The messages
can appear quite different depending on details of the
project.
For example, the message "WRITING TRACK 3"
might fl ash by so quickly you can barely read it if
track 3 is very short. If track 3 is long the messages
"PLEASE WAIT . . ." and a graphic display of prog-
ress such as:
"
Typical messages include:
REQ. XX CD: N
appears if the burning ses-
sion requires more than one
CD.
Turn the Jog Wheel so Y is
displayed, then press and
release the Jog Wheel to
continue.
BUILDING CD appears
briefl y as the CDR420 pre-
pares the CD.
WRITING TRACK #
appears briefl y as the
CDR420 begins writing
each track.
PLEASE WAIT . . . may
scroll by twice and then
PLEASE WAIT . . . may
remain steady.
34%" might appear.
MENU
UTILITY
?
HD
Select
Example display
MENU
UTILITY
HD ?
Select
Example display
MENU
UTILITY
HD
MENU
UTILITY
HD
Example display
MENU
UTILITY
HD
MENU
UTILITY
HD
NOTE:
PLEASE WAIT . . . is displayed during several types of intensive
cpu operations. Wait, it can take 5 minutes or more for some of
these operations.
If the track is long enough
the percentage of the track
written is displayed and
increases to 100%. Dis-
play bars, with a full bar equal to 10%, increase as the
percentage number increases.
The yellow CD light
fl ashes during CD burn- fl ashes during CD burn-
ing, but may stay off for
a couple of minutes dur-
ing some CD burning
operations.
FINALIZING CD is dis-
played briefl y while the CD
is being fi nalized.
DONE scrolls by when the
CD is done.
The completed CD is
ejected and INS. BLANK
CD is displayed if the CD
project requires more than
one CD.
When the CD project is
completed the CD is auto-
matically ejected and the
display asks if you want to
make another copy.
NOTE:
After fi nalizing an Audio CD the display will read "CD
FINALIZED" but if the CD written is an MP3, WAV or MP3/
WAV data CD then the display will read "CD WRITE DONE."
This is different indicating that when a Data CD is closed, only
that particular session closes, allowing you to add content to the
disc at a later time.
- 35 -
MENU
UTILITY
HD
Example display
MENU
UTILITY
HD
MENU
UTILITY
HD
MENU
UTILITY
HD
MENU
UTILITY
HD