Electronic Operation; Hotkeys - FANATEC ClubSport Wheel Base V2 Manual

ELECTRICAL OPERATION
7

7.1 Hotkeys

7.1.1 Tuning menu
To enter the tuning menu use tuning
menu button (usually the small black but-
ton close to the LED display of the used
Fanatec Steering Wheel; see correspond-
ing quick guide of your Fanatec Steering
Wheel). The picture just shows the tuning
menu button on top of the ClubSport Uni-
versal Hub as an example:
7.1.2 Wheel center calibration
If a center calibration is needed (e.g. after updating the firmware of the Club-
Sport Wheel Base V2) first you need to enter the tuning menu as described
above.
When you use a regular Fanatec Steering Wheel
like the BMW M3 GT2, the Formula Black or For-
mula Carbon or the Porsche 918 RSR you must
press the left and right stick at the same time.
Please see corresponding quick guide of the Fa-
natec Steering Wheel you use at the ClubSport
Wheel Base V2.
The picture on the right hand side just shows the
Fanatec Steering Wheel Porsche 918 RSR as an
example:
When you use the ClubSport Universal Hub you must press on top
side of the Universal Hub at the same time to calibrate the wheel center.
ATTENTION: When initialisation and auto calibration of the Club-
Sport Wheel Base is in progress never touch the attached steering wheel
in order to avoid injuries or incorrect calibration!
30