Drilling Template - FANATEC ClubSport Wheel Base V2 Manual

5.6.6 POWER
The POWER connector is used to connect the power supply to the ClubSport
Wheel Base V2.
IMPORTANT:
that came with your ClubSport Wheel Base V2 or that you received from
an authorized repair center. See 'Electrical Safety' in Chapter 1 'General'
for more details!

5.7 Drilling Template

CSW V2 with Adapter
When printing the Drilling Template at home, please make sure that the print size is 100% ( le size = print size).
Therefore deactivate "automatic page scaling" in the print dialog for example."
Bottom view
Right side view
shifter paddle distance
ATTENTION:
mounting with and without 20° mounting adapter from the download area
of our website www.fanatec.com. Printed drilling templates are included
inside the ClubSport Wheel Base V2 package.
15
Please use only the power supply and AC power cord
do not cover
(air flow area)
do not cover
(air flow area)
204,6
overall depth
Please download and print the drilling templates for
Top view
steering axis centerline
driver side
70
100
4x M6 thread
(rig hole 7mm)