General - FANATEC ClubSport Wheel Base V2 Manual

ATTENTION
• The device must not be exposed to rain or humidity in order to avoid risk of fire and the danger
• of electric shock.
• Operating temperature: 15°C – 35°C room temperature
• The recommended operation time of the wheel with continuous force feedback activity is 1 hour.
Let the wheel cool down for a few minutes before you continue.
• Long playing may cause health risks. Take a break of 5 minutes every 20 minutes, and do not
play for more than 2 hours per day.
• We strongly advise you to not drive a vehicle immediately after using a video game.
• Utilization of the vibration and Force Feedback function may cause damage to your health.
• In case of interference with other wireless 2.4 GHz devices, the interfering devices must be
removed or switched off.
• Not intended for children under the age of 6 years. Contains small pieces. Danger of swallowing!
• Do not open the casing of the device.
• This device contains components that cannot be repaired by the user, opening will void the
warranty.
WARNING!
The ClubSport Wheel Base V2 must be connected to an appropriate power source:
• For the used ClubSport Wheel Base V2 use only the power supply and AC power cord that
came with your ClubSport Wheel Base V2 or that you received from an authorized repair center.
• For the used ClubSport Wheel Base V2 do not use non-standard power sources, such as
generators or inverters, even if the voltage and frequency appear acceptable. Only use AC
power provided by a standard wall outlet.
• To avoid damaging the ClubSport Wheel Base V2:
Do not expose your ClubSport Wheel Base V2 to sources of heat.
• When connecting and / or disconnecting any Steering Wheel (e.g. Porsche 918 RSR or Universal
Hub) to / from ClubSport Wheel Base V2 take care of the pins inside the quick release.
• Do not try to use the ClubSport Wheel Base with other Steering Wheels than Fanatec Steering
Wheels.
• Do not try to use the ClubSport Wheel Base with an external power source different from the
power supply packaged with the ClubSport Wheel Base V2 or received from authorized repair
center.
• Unplug the power cord of your ClubSport Wheel Base V2 during storms or when unused for
long periods of time to protect also your ClubSport Wheel Base V2.
• If the ClubSport Wheel Base V2 becomes damaged in any way, stop using it immediately and
contact Fanatec Customer Support.
5

GENERAL

1
Electrical Safety