FANATEC ClubSport Wheel Base V2 Manual page 31

7.1.3 PS3 mode
Initially the ClubSport Wheel Base V2 is in PC mode. For use on PlayStation 3
the ClubSport Wheel Base V2 must be switched to PS3 mode.
When you use a regular Fanatec Steering Wheel like the BMW M3 GT2, the
Formula Black or Formula Carbon or the Porsche 918 RSR you must press the
buttons SELECT (9) + HORN (22) or SELECT (9) + CIRCLE (3) at the same
time right after auto calibration of the ClubSport Wheel Base V2 is completed.
Please see corresponding quick guide of the Fanatec Steering Wheel you use
at the ClubSport Wheel Base V2.
When you use the ClubSport Universal Hub you must press at the
same time right after auto calibration of the ClubSport Wheel Base V2 is com-
pleted. Please see user manual of the Universal Hub as well.
The tuning display of your Fanatec
Steering Wheel shows a red spot when
PS3 mode is active as shown on the
picture on the right hand side (e.g. Uni-
versal Hub):
7.1.4 Shifter calibration mode
To enter the H-pattern shifter calibration mode on
regular Fanatec Steering Wheels press START
(10) + tuning menu button at the same
time. The START button is usually the black
button on the lower right center of the Steering
Wheel, the picture on the right hand side shows
the Porsche 918 RSR as an example:
To enter the H-pattern shifter calibration
mode on the Universal Hub press START
(10) + tuning menu button at the same
time:
31