FANATEC ClubSport Wheel Base V2 Manual page 22

When Bootloader mode is active the
fans are OFF and the LED ring around
the red power button 'START' on the
front plate of the ClubSport Wheel Base
V2 is lit blue (all 4 segments). On the PC
screen this window will appear automat-
ically as shown on the right hand side:
Click on the upper button 'Start firmware updater'.
Then a new window will appear as
shown on the right hand side:
Connect to your ClubSport Wheel
Base V2 by pressing the button 'Con-
nect'.
22