FANATEC ClubSport Wheel Base V2 Manual page 23

When the Base Updater is connect-
ed to the ClubSport Wheel Base V2
the buttons 'Load Hex File' and 'Flash
Firmware' are available as shown on
the right hand side:
Use button 'Load Hex File' to browse
and select the wanted firmware file
(.hex). Usually the latest available
firmware found is already pre-select-
ed and this step can be skipped.
When the pre-selected firmware file
(.hex) is ok or the wanted firmware
file (.hex) is chosen press button
'Flash Firmware' to execute the firm-
ware update.
The firmware update is proceeding.
You can see the progress bar becom-
ing green as shown on the right hand
side:
23