FANATEC ClubSport Wheel Base V2 Manual page 14

5.6.1 USB
The USB port is used to connect the ClubSport Wheel Base to the PC or Play-
Station 3.
IMPORTANT: Use only the USB cable with the 90° plug which is pack-
aged with your ClubSport Wheel Base V2 to avoid damages on the Club-
Sport Wheel Base V2 electronics!
5.6.2 SHIFTER1
The SHIFTER1 port is used to connect H-pattern shifters to the ClubSport
Wheel Base V2, e.g. the ClubSport Shifter (CSS) or the ClubSport Shifter SQ
(CSS SQ) in H-pattern mode. Also sequential shifters can be connected to this
port and will be detected correctly. Note: Sequential shifters connected to this
port can be mapped identically to the shifter paddles at the Fanatec Steering
Wheels like the BMW M3 GT2, the Formula Black or Formula Carbon, the Por-
sche 918 RSR or the Universal Hub with assembled shifter paddle boxes by PC
driver settings (see chapter 'PC driver' of this user manual).
5.6.3 SHIFTER2
The SHIFTER2 port is used to connect sequential shifters (SQ) to the Club-
Sport Wheel Base V2, e.g. the ClubSport Shifter SQ (CSS SQ) in SQ mode
or the ClubSport Static Shifter Paddles (CS SSP). Note: Sequential shifters
connected to this port can be mapped identically to the shifter paddles at the
Fanatec Steering Wheels like the BMW M3 GT2, the Formula Black or Formula
Carbon, the Porsche 918 RSR or the Universal Hub with assembled shifter
paddle boxes by PC driver settings (see chapter 'PC driver' of this user manu-
al). Attention: H-pattern shifters will not work on SHIFTER2 port!
5.6.4 PEDAL
The PEDAL port is used to connect pedals to the ClubSport Wheel Base V2,
e.g. the ClubSport Pedals (CSP), the CSR Pedals (CSR P) or the CSR Elite
Pedals (CSR EP).
5.6.5 DATA
The DATA port is used to connect LED displays to the ClubSport Wheel Base V2.
14