Electronic Operation; Hotkeys - FANATEC CSL Elite Racing Wheel Manual

ELECTRICAL OPERATION
8

8.1 Hotkeys

8.1.1 Tuning menu
To enter the tuning menu, use the tuning menu but-
ton (usually the button with the wrench symbol or the
small black button close to the LED display of your
Fanatec steering wheel; see corresponding quick
®
guide of your Fanatec steering wheel). The picture
®
shows the tuning menu button of the CSL Elite Steer-
ing Wheel (PS4 version) as an example:
TM
8.1.2 Restore original tuning menu settings
To restore the original tuning menu settings, open the tuning menu. S_1 will be
shown on the tuning display. Then press and hold the tuning menu button for
about five seconds until 'rSt' is displayed.
8.1.3 Wheel center calibration
If a center calibration is needed (e.g. after updating the
firmware of the CSL Elite Racing Wheel) first you need
to enter the tuning menu as described above.
When you use the CSL Elite Steering Wheel (PS4
TM
version) you must press the buttons + at the
same time.
When you use a Fanatec steering wheel from the
®
ClubSport Series you must press the left and right stick at the same time.
Please see corresponding quick guide of the Fanatec steering wheel you use
®
at the CSL Elite Racing Wheel (PS4 version).
TM
ATTENTION: When initialization and auto calibration of the CSL Elite
Racing Wheel is in progress never touch the attached steering wheel in
order to avoid injuries or incorrect calibration!
33