FANATEC ClubSport Wheel Base V2 Manual page 17

6.1.1 PC driver
The PC driver is a very helpful tool as it
can assist the user to do functional tests,
adjustments and update procedure on the
ClubSport Wheel Base V2.
When you start the driver this window as
shown on the right hand side will appear
and show all connected USB devices:
Double-click the ClubSport Wheel to go
ahead and see the complete menu.
The next appearing menu 'function test'
then is depending on the attached Fanatec
Steering Wheel. For the manual there is used the ClubSport Universal Hub as
an example, see pictures below:
This window shows you a lot of different information and gives possibilities to
test the currently used hardware and peripherals:
17