Basic Operation (Factory Setting) - Mitsubishi Electric FR-A800 Installation Manuallines

DRIVE THE MOTOR

6.1.2 Basic operation (factory setting)

Operation mode switchover/frequency setting
External operation mode
*1
(At power-ON)
Parameter setting mode (At power-ON)
Parameter setting mode
*5
Group parameter setting
Function mode
Long press
*1
For the details of operation modes, refer to the Instruction Manual.
*2
Monitored items can be changed. (Refer to the Instruction Manual.)
*3
For the details of the trace function, refer to the Instruction Manual.
*4
For the details of faults history, refer to the Instruction Manual.
*5
The USB memory mode will appear if a USB memory device is connected. Refer to the Instruction Manual for the USB memory mode.
*6
HAND/AUTO key only when using FR-DU08-01.
*7
Drawing features display of FR-DU08. LED displays of FR-DU08-01 for PU and EXT are different (HAND, AUTO), see previous page.
32
PU operation mode
*6
*7
Value change
Output current monitor
*7
*2
*7
Value change
Parameter clear All parameter clear
Automatic parameter setting
*7
(Example)
Flickering
Faults history 1
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
*6
*1
*7
Frequency setting has been written
*2
Faults history clear
IPM parameter initialization
*3
Trace function
(Example)
Flickering
*4
Faults history 2
is displayed.
*1
PU JOG operation mode
*6
*7
Flicker
Example
and completed!
*2
Output voltage monitor
Display the present
setting
Parameter write is completed!
Parameter copy
Initial value change list
(Example)
Flickering
*4 *4
Faults history 8