Basic Operation (Factory Setting) - Mitsubishi Electric FR-F820-00046 Instruction Manual

6.1.2

Basic operation (factory setting)

Operation mode switchover/Frequency setting
External operation mode
Parameter setting mode (At power-ON)
Parameter setting mode
∗5
Group parameter setting
Function mode
Long press

For the details of operation modes, refer to the Instruction Manual (Detailed).

Monitored items can be changed. (Refer to the Instruction Manual (Detailed).)

For the details, refer to the Instruction Manual (Detailed).

For the details of faults history, refer to the Instruction Manual (Detailed).

The USB memory mode will appear if a USB memory device is connected. Refer to the Instruction Manual (Detailed) for the details of the USB memory mode.
∗1( At power-ON)
PU operation mode
Value change
Output current monitor
∗2
Value change
Parameter clear All parameter clear
Automatic parameter setting
(Example)
Flickering
Faults history 1
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
∗1
Frequency setting has been
written and completed!!
∗2
Display the present
setting
Parameter write is completed!!
Faults history clear
IPM parameter initialization
∗3
Trace function PID gain tuning
(Example)
Flickering
∗4 ∗4
Faults history 2
is displayed.
Operation panel (FR-DU08)
PU Jog operation mode ∗1
Flicker
(Example)
Output voltage monitor ∗2
Flicker
(Example)
Parameter copy
Initial value change list
∗3
(Example)
Flickering
∗4
Faults history 8
DRIVE THE MOTOR
17