エラー
スタイルが定義されていません。 エラー
!
エラー
4.23 JK board
Removing the JK board
To remove the JK board, follow the steps below and refer to Figure 4-34.
1. Disconnect the JK board FFC from the connector CN4631 on the system board and
CN6491 on the JK board.
2. Remove the JK board from the base assembly.
QOSMIO F60 Maintenance Manual (960-796)
スタイルが定義されていません。
!
CN4631
Figure 4-34 Removing the JK board
スタイルが定義されていません。
!
Replacement Procedures
JK board
CN6491
Guide
JK board FFC
[CONFIDENTIAL]
エラー
ス
!
4-57