エラー
スタイルが定義されていません。 エラー
!
エラー
4.13 TP board
Removing the TP board
To remove the SW board, follow the steps below and refer to Figure 4-20.
1. Remove the following screw and TP board.
M2.04B
2. Disconnect the TP board harness from the connector on the TP board.
TP board harness
TP board
Guide
Insulator
QOSMIO F60 Maintenance Manual (960-796)
スタイルが定義されていません。
!
S-THIN HEAD screw
Figure 4-20 Removing the TP board
スタイルが定義されていません。
!
Replacement Procedures
1
M2.0x4B S-THIN HEAD
[CONFIDENTIAL]
エラー
ス
!
4-37