エラー
スタイルが定義されていません。
!
4.6
HDD
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-6 and 4-7.
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
data loss or damage to the device.
1. Remove the following screw securing the HDD cover.
M2.54B
2. Insert your finger into the slit and remove the HDD cover.
4-18
[CONFIDENTIAL]
Replacement Procedures
FLAT HEAD screw
HDD cover
Figure 4-6 Removing the HDD cover
エラー
1
M2.5x4B FLAT HEAD
QOSMIO F60 Maintenance Manual (960-796)
スタイルが定義されてい
!
Slit