Toshiba Qosmio F60 Series Maintenance Manual page 359

エラー スタイルが定義されていません。
!
Installing the JK board
To install the JK board, follow the steps below and refer to Figure 4-34.
1. Connect the JK board FFC to the connector CN6491 on the JK board.
2. Set the JK board into the guides of the base assembly.
3. Connect the JK board FFC to the connector CN4631 on the system board.
4-58 [CONFIDENTIAL]
Replacement Procedures
QOSMIO F60 Maintenance Manual (960-796)
エラー ス
!