エラー
スタイルが定義されていません。
!
Installing the TP board
To install the TP board, follow the steps below and refer to Figure 4-20.
1. Connect the TP board harness to the connector on the TP board.
2. Set the TP board to the guide and secure it with the following screw.
M2.04B
3. Arrange the TP board harness under the insulator.
4-38
[CONFIDENTIAL]
Replacement Procedures
S-THIN HEAD screw
QOSMIO F60 Maintenance Manual (960-796)
エラー
スタイルが定義されてい
!
1