Cover Assembly - Toshiba Qosmio F60 Series Maintenance Manual

エラー スタイルが定義されていません。 エラー
!
エラー
4.8

Cover assembly

Removing the Cover assembly
To remove the cover assembly, follow the steps below and refer to Figure 4-11 to 4-13.
1. Close the display and turn over the computer.
2. Disconnect the TV tuner antenna cable and speaker harness from the connectors
on the TV tuner and CN6150 on the system board. (When replacing the TV tuner
antenna cable, speaker or system board.)
3. Remove the following screws securing the cover assembly.
 M2.56B
 M2.510B
 M2.516B
QOSMIO F60 Maintenance Manual (960-796)
スタイルが定義されていません。
!
FLAT HEAD screw 12 (Described as "6" in the figure)
FLAT HEAD screw 6 (Described as "10" in the figure)
FLAT HEAD screw 3 (Described as "16" in the figure)
スタイルが定義されていません。
!
Replacement Procedures
[CONFIDENTIAL]
エラー ス
!
4-23