エラー
スタイルが定義されていません。 エラー
!
エラー
2. Take out the DC-IN harness and RJ45 harness from the slot.
3. Remove the following screw and F-jack from the slot of the base assembly.
M2.04B
4. Remove the USB harness from the slot.
M2.0X4B BIND
RJ45 harness
DC-IN harness
QOSMIO F60 Maintenance Manual (960-796)
スタイルが定義されていません。
!
BIND screw
F jack
Figure 4-37 Removing the system board (2)
スタイルが定義されていません。
!
Replacement Procedures
1
USB harness
[CONFIDENTIAL]
エラー
ス
!
4-63